Blog
Latest Entries
Shape Optimization Techniques for Designing Features – Part I
Shape optimization in GENESIS is commonly used to design the external shape of structures and/or its members. Figure 1 However, the same techniques used for typical shape optimization problem can also be used to design details or features of structures. In this...
Topography Optimization with GENESIS – Sept 22nd – 1:30pm EST
Next in the GENESIS Webinar Series is Topography Optimization, which is a shape optimization capability that allows the user to find location and shape of bead patterns to stiffen panel structures. An example is discussed to demonstrate the different features...
Shape Optimization with GENESIS Webinar – Sept 15th at 1:30 pm EST
In week 5 of the GENESIS Webinar Series, Shape Optimization capability in GENESIS to find the shape of the structure is described. An example is presented to illustrate different ways to create shape changes on the structure and perform optimization. Hosted by Ravi...
Super Elements – Accelerate Analysis in the Design Process – Part 3
Previously, superlement in Finite Element Analysis is described and a Normal Mode Analysis for a BIW Body-In-White (BIW) Model without superelements is performed and the results are studied. Now Normal Mode Analysis of BIW Model ran with using superelements and the...
Free GENESIS Webinar Series – Sizing Optimization with GENESIS – Wednesday, September 1st, 1:30 pm EST
Next in the FREE GENESIS Webinar Series is Sizing Optimization. This session explains Sizing Optimization and demonstrate how to quickly setup a simple Sizing problem in GENESIS. An automotive engineering example will used to illustrate the steps involved in the...
Super Elements – Accelerate analysis in the design process – Part 2
Now that a superelement is explained in the last week’s blog, let’s illustrate the application with the following example in GENESIS®: A Normal Mode Analysis is performed for a BIW Body-In-White (BIW) Model of an Automobile. Initially, the analysis is run without...
GENESIS Webinar Series – Topology Optimization with GENESIS – Wednesday, August 25th, 1:30 pm EST
Topology Optimization with GENESIS The second session in the Webinar Series on GENESIS introduces Topology Optimization. In this webinar, we will define Topology Optimization and solve an engineering problem in GENESIS using this technique. Additionally, discuss a few...
Super Elements – Accelerate Analysis In The Design Process
Introduction to Superelements: Although computational power and resources are ever-increasing, finite element models continue to increase in complexity and analysis requires more computational time. Also, finite element analysis is performed numerous times during the...
GENESIS Webinar Series – Introduction to GENESIS: Wednesday, August 18th, 1:30 pm EST
Would you be interested to learn about Optimization in Engineering? GENESIS Structural Analysis & Optimization Software from OmniQuest is the leader in Engineering Optimization for over three decades. “Introduction to GENESIS”, the first session of the Webinar...
It’s not hard; it’s a math problem!
Most design and process solutions are improved by subject matter experts’ experience and heuristics – the methods developed over years upon which their intuition is based. What if there were underlying algorithms and computations upon which the physical...
Connect with us now for complimentary webinars and evaluation software.
Our engineering team can work with you to conduct a Test Case showing how OmniQuestTM will improve your designs, processes and your overall business.